บล็อก


บ้าน> บล็อก> ความหมายของแม่พิมพ์ฉีดที่มีความแม่นยำคุณรู้จริงหรือ?

ความหมายของแม่พิมพ์ฉีดที่มีความแม่นยำคุณรู้จริงหรือ?

2020-03-07 hqt

The definition of precision injection molds is determined according to two indicators, one is the precision of the processing equipment, and the other is the error caused by the mold processing. The comprehensive level of an injection molding machine is determined by the weight error of the ฉีดขึ้นรูปพลาสติก machine. The error is less than 0.5% for the precision injection molding machine, the error is less than 0.3% for the ultra-precision machine, and the machine with the error of about 1% is the ordinary injection molding machine. As of the current state of the art, the world’s most precise injection molding machine can achieve an error of less than 0.15%.

The accuracy of the processed mold is mainly affected by several factors:

AS resin has a strong load carrying capacity, chemical resistance, thermal deformation resistance and geometric stability. The addition of a glass fiber additive to the AS resin increases the strength and resistance to thermal deformation and reduces the coefficient of thermal expansion. The Vicat softening temperature of the AS resin is about 110 °C. The deflection temperature under load is about 100 °C. The shrinkage of the AS resin is about 0.3-0.7%. AS resin is a hard, transparent material. The styrene component makes the AS resin hard, transparent and easy to process; the acrylonitrile component makes the SAN (AS) chemically and thermally stable.

The processing temperature of the AS resin is generally from 200 to 250 ° C. The material is easy to absorb moisture and needs to be dried for more than one hour before processing. Its fluidity is slightly worse than PS, so the injection pressure is slightly higher. Drying treatment If the storage is not suitable, the AS resin has some hygroscopic properties. The recommended drying conditions are 80 ° C for 2-4 hours.

The melting temperature is 200-270 °C. If a thick walled product is processed, a melting temperature below the lower limit can be used.

อุณหภูมิแม่พิมพ์อยู่ที่ 40-80 ° C สำหรับวัสดุเสริมแรงอุณหภูมิของแม่พิมพ์ไม่ควรเกิน 60 ° C ระบบทำความเย็นต้องได้รับการออกแบบมาอย่างดีเนื่องจากอุณหภูมิของแม่พิมพ์จะส่งผลโดยตรงต่อลักษณะการหดตัวและการโค้งงอของผลิตภัณฑ์
แรงดันฉีด 350-1300 บาร์ความเร็วในการฉีดแนะนำให้ฉีดด้วยความเร็วสูง

Runners and Gates สามารถใช้ได้ทุกประตู ขนาดประตูต้องเหมาะสมเพื่อหลีกเลี่ยงไม่ให้มีริ้วรอยกระและช่องว่าง

หากเราสามารถช่วยคุณในโครงการของคุณได้โปรดโทรหาเราที่0086-769-82821468 หรืออีเมลsales@kaitomould.com.



linkedin
ด้านบน