သင်သည်အစိတ်အပိုင်းတစ်ခုကိုစမ်းသပ်ခြင်း၊ တစ်ခုခုကိုရှေ့ပြေးပုံစံပြုလုပ်ခြင်း (သို့) သင်၏အစိတ်အပိုင်းသည်အလွန်သေးငယ်သော (ဂရမ်အနည်းငယ်) မရှိလျှင် 3D ပုံနှိပ်ခြင်းသည်ထုတ်လုပ်မှုလုပ်ငန်းစဉ်မဟုတ်ပါ။ ၎င်းသည်ခဏတာပြောင်းလဲရန်မဖြစ်နိုင်ပါ။

ကျွန်ုပ်တို့သည်ထုတ်လုပ်မှုဆိုင်ရာကိရိယာများနှင့်သာအလုပ်လုပ်ပြီးလိုအပ်ချက်အများစုအတွက်ပေါင် ၃၅၀၀ အောက်သာရှိသည်။ ဒီဇိုင်း (အရောင်ရောစပ်နိုင်သည်) ။

Injection moulding tooling can make multiple parts per cycle. A 4 impression tool makes 4 parts every cycle – often taking little or no extra time from a 1 impression tool. If you’re making lots of parts, then you want to get a multiple impression tool made because the part price is primarily made up from the cost of the material and the time it takes to make it. More impressions = less machine time = less cost. The extra impressions can cost extra but often that extra cost can be absorbed in the savings made over a year on the part price. Hint, if you’re only planning on getting 500 parts made, you’ll go for a 1 impression tool, if you’re planning on 20,000 parts you’ll almost certainly want a multiple impression tool (8, 16 +)

As a production company we’re not really kitted out for small runs like this. If it’s an ongoing job we’d be happy to consider it but if it’s a one-off it’s unlikely we’ll accept the work as we just don’t have the resources to deal with small batches. On smaller quantities the setup of the machine (tool change, material purging, material drying, testing etc) is absorbed into the part price, so often it’s not really worth your while getting less than a thousand parts made anyway. There are other companies that are better suited to deal with this setup and I hope you don’t feel upset with us if we say no to the project!

Right now, we’re not set up to work as design for manufacturing consultants on our customer’s projects. We will offer advice to our customers if we see there are some issues that are obviously wrong with the part, but we do not accept responsibility for any extra tooling costs involved if you’ve not design your part properly for manufacturing.