บล็อก


บ้าน> บล็อก> วิธีทำความสะอาดชิ้นส่วนพลาสติกขึ้นรูปสำหรับรถยนต์: (เทคนิคการขึ้นรูปพลาสติก 2020)

วิธีทำความสะอาดชิ้นส่วนพลาสติกขึ้นรูปสำหรับรถยนต์: (เทคนิคการขึ้นรูปพลาสติก 2020)

2020-10-28 hqt

วิธีทำความสะอาดชิ้นส่วนพลาสติกขึ้นรูปสำหรับรถยนต์: (เทคนิคการขึ้นรูปพลาสติก 2020)

Molded Plastic Parts

ในการผลิตชิ้นส่วนพลาสติกขึ้นรูปการหดตัวมีความสำคัญมาก และเราต้องพิจารณาอย่างรอบคอบเนื่องจากจะสะท้อนขนาดของผลิตภัณฑ์ขึ้นรูป นอกจากนี้จะมีผลต่อรายการฉีดที่สำคัญต่อไปนี้:

  • ความแข็งที่การหดตัวอาจทำให้เกิดในจุดต่างๆของผลิตภัณฑ์ที่มีความหนาต่างกันความตึงเครียดที่อาจทำให้เกิดรอยแตกการแตกร้าว ฯลฯ เนื่องจากความไม่แน่นอนของมิติการหดตัวอาจไม่สม่ำเสมอกันบนพื้นผิวของชิ้นส่วนที่ขึ้นรูป ดังนั้นจะทำให้เกิดการบิดงอและเสียรูปทรง สิ่งนี้มักเกิดขึ้นกับชิ้นส่วนที่มีความหนาต่างกันในส่วนต่างๆ ดังนั้นพวกเขาจึงไม่ได้รับการหดตัวสม่ำเสมอ
  • การใส่ชิ้นส่วนโลหะซึ่งการหดตัวของโลหะแตกต่างจากพลาสติก สิ่งนี้เมื่อทำให้เย็นลงสามารถหดตัวได้มากกว่าโลหะสองถึงห้าเท่า ดังนั้นแรงของการหดตัวนี้ที่กระทำต่อโลหะ มีความต้านทานเชิงกลมากขึ้นอาจทำให้ชิ้นส่วนพลาสติกขึ้นรูปการแตกได้
  • ค่าความคลาดเคลื่อนมิติที่ได้จากค่าสัมประสิทธิ์การหดตัวของพลาสติกนั้นไม่คงที่เสมอไป นอกจากนี้ยังขึ้นอยู่กับปัจจัยหลายประการเช่นความไม่สอดคล้องกันของคุณสมบัติของวัตถุดิบที่ใช้ในการเตรียม ฯลฯ ค่าความคลาดเคลื่อนเฉลี่ยที่ใช้ในการกำหนดขนาดของชิ้นส่วนจะต้องไม่น้อยกว่าขีด จำกัด ที่กำหนด

ชิ้นส่วนพลาสติกขึ้นรูปที่สำคัญข้อควรระวัง

เมื่อสร้างโครงการฉีดเราต้องใส่ใจกับลักษณะอื่น ๆ อีกมากมายในการสร้างเครื่องมือนี้ เนื่องจากนอกจากส่วนประกอบทางกายภาพที่ประกอบขึ้นเป็นส่วนประกอบแล้วยังต้องใช้ข้อมูลและเทคนิคอื่น ๆ อีกมากมายในโครงการ

  • แผงปิดที่ปิดกั้นชิ้นส่วนกลไกที่ไม่พึงประสงค์
  • ชิ้นส่วนพลาสติกขึ้นรูปเช่นแผงประตูเพื่อให้ประกอบง่าย
  • ส่วนประกอบที่เรียบและทาสีเช่นกันชนและการตกแต่งภายใน
  • พลาสติกสัมผัสนุ่มเพื่อการตกแต่งภายในที่สวยงาม
  • Textured ชิ้นส่วนพลาสติกขึ้นรูปการ

Molded Plastic Parts suppliers

ชิ้นส่วนพลาสติกอาจสกปรกได้เช่นเดียวกับส่วนที่เหลือของรถของคุณ อาจเป็นฝุ่นน้ำมันหรือแม้แต่อาหารหรือเครื่องดื่มที่ยังคงอยู่ในพลาสติก พลาสติกอาจต้องได้รับการปฏิบัติที่แตกต่างจากชิ้นส่วนอื่น ๆ ขึ้นอยู่กับองค์ประกอบและการเคลือบผิว

วิธีที่ 1: ทำความสะอาดชิ้นส่วนพลาสติกขึ้นรูปภายใน

ภายในรถของคุณได้รับการปกป้องจากสิ่งแวดล้อมมากกว่าภายนอกอย่างเห็นได้ชัด ปัญหาทั่วไปที่เกิดขึ้นกับพลาสติกด้านใน ได้แก่ :

  • รอยแตก
  • การสะสมของฝุ่น
  • สิ่งสกปรก

Once a ชิ้นส่วนพลาสติกขึ้นรูปการ is broken, you will not be able to restore it to its previous condition. You can, however, treat your interior plastic to prevent most cracks and deterioration while you clean your car’s interior plastic. Look for a high quality cleaning product that also conditions the plastic.

Tip: Car wipers that leave an oily shine may look good initially, but they collect dust and dirt quickly. Use a cleaning product that does not have an oily feeling or shine after use.

Necessary materials

  • Indoor cleaning product
  • Detail brush or toothbrush
  • Foam applicator pads
  • Lint-free cloths or microfiber cloths

Molded Plastic Parts Tips

ขั้นตอนที่ 1: clean the dusty surfaces. Use a lint-free cloth to clean all the inside of your car.

You are looking to remove most of the dust and dirt, so that the end result is cleaner and scratch-free.

If the surfaces are very dirty, you can use a damp cloth to absorb more dirt initially.

 

Step 2: Spray the plastic cleaner over a foam applicator. If you spray directly on parts like the dashboard or the door panel, the fog will settle on the windows, making you work harder to clean the car later.

Place the applicator moist with the cleaner.

Step 3: Clean the inner plastic with the cushioned applicator.

Work with one area at a time. If you are cleaning the panel, clean it thoroughly with the cleaner and proceed to the next step.

Step 4: Clean the ชิ้นส่วนพลาสติกขึ้นรูปการ trim with a lint-free cloth. This will remove most of the moisture and leave a clean, dust-free surface.

Repeat for each plastic area.

Molded Plastic Parts manufacturers

Step 5: Clean dirty cracks . There are seams and crevices wherever plastic parts meet another surface. Dirt accumulates in these areas frequently, making a clean car look a little sloppy.

  • Dip the detailing brush into the plastic cleaner or spray the brush with the cleaner.
  • Work the brush bristles or a Q-Tip into the slot in a forward and backward motion.
  • Take the dirt and cleaner you brush with a cloth.
  • Wipe deeply into the slot with the cloth to absorb any remaining cleaner.

Tip: Transparent plastic parts, such as the instrument panel or radio screen, are best cleaned with glass cleaner, just like windows.

Conclusion

Keeping the ชิ้นส่วนพลาสติกขึ้นรูปการ of the car clean should be part of your regular maintenance routine. The better you take care of all parts of your car, the better all parts will work together and the longer they will last.

การขึ้นรูปพลาสติกและการตัดเฉือนซีเอ็นซีที่แม่นยำได้กลายเป็นเทคนิคบังคับสำหรับอุตสาหกรรมสมัยใหม่ หากคุณกำลังจะเปิดธุรกิจใหม่และกำลังมองหาบริการขึ้นรูปพลาสติกKaitom  เป็นตัวเลือกที่ดีที่สุด เราอยู่ที่นี่เพื่อรองรับลูกค้าของเราทั่วโลก เราสามารถพัฒนาชิ้นส่วนพลาสติกขึ้นรูปได้ทุกชนิด หากคุณต้องการชิ้นส่วนพลาสติกขึ้นรูปโดยเฉพาะสามารถขอใบเสนอราคา ได้เลย



linkedin
ด้านบน